BY Nick Bulanda
Published January 1, 2019
How To Install Baby Car Seat Rear Facing Explained
Are you a brand new parent. Well, parenthood is very stressful. This does not even include buying the right infant car seat. Let alone properly installing this car seat. Do you need help on how to install a baby car seat rear facing position? You are in luck. This article has all of the helpful information that you need and more. Read helpful tips and information below. Then, properly install your brand new infant car seat today!
How To Install Baby Car Seat Rear Facing: Seat Belt Steps
Do not stress yourself out. You can redo this installation process at any given moment. Feel like you made a mistake? Retry the installation. You should not rush through this installation process whatsoever. Your child’s safety is on the line. Read all of the steps on how to install baby car seat rear facing position below:
1. Read Information Guide
Yes, this is a really obvious step. But, some parents skip over it entirely. The National Highway Traffic Safety Administration recommends this step. Read through the instructional manual and your own vehicle’s owner manual. Every single vehicle is made to be different and distinct from one another. Therefore, the seat design is going to be different from car to car. Make sure you know everything there is to know about your seat setup!
2. Place The Car Seat Into Position
Now, the best spot for learning how to install baby car seat rear facing position is the middle of the back row. Do not put the car seat into a seat with an airbag. The airbag will hit their head and cause damage. Instead, place your car seat right into the middle of the rear row. Position the car seat so it faces backward. Your baby cannot face forward!
3.) Thread The Seat Belt
Take your seat belt and check for twists. Then, slide the seat belt through the opening. Every infant car seat comes with slots for the seat belt. Slide it through and make sure there are no issues with the seat belt.
4.) Secure The Seat Belt!
Buckle the seatbelt and make sure it is tight. Then, lock the seat belt so it does not move. You need to tighten and press down on the car seat. It cannot move more than 1-inch in a side-to-side motion or a front-to-back motion. If it does move more than 1-inch, repeat the installation process! Learning how to install baby car seat rear facing position may take some time. But it is totally worth it!
How To Install Baby Car Seat Rear Facing: Final Steps
Now, you have set up your car seat properly. You need to place your child into the car seat. Here is how you can do this:
1. Place Your Child In The Seat
Your baby needs to be put into the car seat with their back flat. If not, then they are not secure in the car seat!
2.) Secure Harness
Take the harness and place it over your child’s shoulders. The straps cannot be twisted or flat. Furthermore, make sure they line up with the proper openings!
3.) Buckle The Harness
Use the chest clip and buckle up the harness. Now, this needs to be really snug. Continue to tighten the fit until it is firm and very snug. Avoid extra material in the form of thick coats. Instead, give them a light jacket underneath and a blanket over the car seat!
4.) Place The Chest Clip
The chest slip must be at the armpit level. If not, then it does not properly strap in your child. Again, repeat the process if you feel unsure about how to install baby car seat rear facing. It helps to try and try until you get it!
Last Advice On How To Install Baby Car Seat Rear Facing
Hopefully, you now know how to properly install a rear facing infant car seat. Experts recommend this position until babies are bigger. Parents usually want to see their child’s face. Thus, they put them in a forward-facing position. Do not do this! It is incredibly dangerous.
Look back over all of these steps to learn more about rear facing car seat installation. Want to find one of the best infant car seats. Check out our buying guide to the safest car seats 2019 for great product information, reviews, and recommendations!